人形机器人 H.E.M. 外骨架

Stationeers H.E.M. Droids

2023-08-24 22:27:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

~18cm tall Stationeers H.E.M. Droids (assembled).

https://store.steampowered.com/app/544550/Stationeers/

Hollow heads for wireless LEDs for example.

This is an unofficial fan work and is not approved/endorsed by RocketWerkz

DECALS
I added a .png with the water transfer decals that I made using a regular inkjet printer and white water transfer foil. If you want to use them make some test prints to scale them accordingly. Don't forget to mirror them before printing onto the foil! Two of the original models can be found here for reference: https://sketchfab.com/3d-models/stationeers-hem-droids-9f54a7f972ea4627a41d36b5042ebdc7

3D PRINTING SETTINGS
Printing with tough resin is recommended (I tested generic resin but elbows on the lower arms snapped when I clicked them in... not hard to repair even after painting but rather annoying). Make sure to wash the joint cavities properly as any leftover resin will block movement especially at the hip.

FDM printing might work for you but will require experience with custom supports and part orientation for good results (tolerances may vary depending on your extrusion settings).

Don't miss out on this cool rover from the original artist:
https://www.thingiverse.com/thing:3973100

Got ideas, questions or need changes? Let me know...
Tip-Jar:
https://www.paypal.com/paypalme/wikus