范围对齐工具

Scope Alignment Tool

2023-08-25 01:11:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a clip-on, adjustable tool to assist in aligning the reticle of a scope. I had a couple of scopes that when level the reticle was slightly off-level. This affects the use of the BDC or Mil-Dots and throws accuracy off over distance when compensating for drop or windage. There are tools out there to correctly align the rotation of a scope but if your reticle is not level and plumb after aligning then this tool will help visually assist in getting it fine-tuned.

To use it you will need to place it as far away from the scope as your rail system allows and make sure the scope is zoomed all the way out. You may need to adjust eye relief and parallax to get a clear picture. It's easy to use and anyone can figure it out.

Make sure the PLA is not cooled too fast so as not to warp the vertical post. Allow the pieces to fully cool before removing them from the print bed to further resist warping/bending.