简便箔片螺栓对齐工具

easy foil mount nut aligner

2024-03-17 23:49:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

When mounting the foil to board it can be tricky to put all the nuts in place. This part helps to align the nuts with the baseplate of the foil.
I designed the part for nuts from Gong Galaxy (the opening for the nut is 22x7mm)

print four of them.
put the nuts inside the printed parts
glue a rod of 149mm length in the side holes of the printed parts
(the first site can be glued before putting the nut in the fin box - the second should be glued in the fin box. I use hot glue for this - just put the glue in the hole, insert the nut in the box - put the rod in the hole with the soft glue. (You must be quick for this.)