螺母与螺栓0.6毫米公差测试
Nut & Bolt 0.6mm Tolerance Test
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is Simple Nut & Bolt Tolerance test I made to test you printers 0.6mm or New 0.6mm Nozzle's Settings! Note that it is a Lefty-Tighty Bolt.
Good Tolerance: Twisting them both together should be effortless. Your settings are pretty good.
Bad Tolerance: The two will barely or not even screw together. You might want to adjust some of you slicer settings or Z-Offset.
It should take Less than 20 Minutes to make depending on your printer. Some things I recommend are always a 100% Fan Speed and a Open Frame. (If you Have an Enclosure, leave the door open or take the top off.) Other than that, I hope it helps! :)
Print Settings
- Rafts:Doesn't Matter
- Supports:No
- Resolution:0.3mm
- Infill:15%
- Filament brand:
Any, I Used ESun
- Filament color:
Any
- Filament material:
Preferrably PLA
License
Nut & Bolt 0.6mm Tolerance Test
by Antler_K9X is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
Xbox One 控制器支撑台（宽基版）2023-05-12 -
极星隧道衬垫2024-01-05 -
Horaco 8端口开关 10英寸服务器架安装装置2024-03-24 -
3D模型：肩部按钮模块V0.1B2024-03-25 -
10cm 曲奇形状模具2024-04-20
最热下载
-
怪兽大战：1998版2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
GPD Win 2 高性能3D工作站2023-04-30 -
18650电池存储盒2024-04-18 -
HomePod mini 壁挂式插座支架（欧规版）｜稳固不占地·支持线材整理2024-05-04
最新模型
-
3D 打印遥控刷式喷气推进船（喷气船）2025-09-15 -
模块化笔筒链2025-07-19 -
巴黎卢浮宫的三圣母像2025-07-16 -
兔女郎半身像2025-07-15
