边缘式水族箱配件适配器（2款）
Rimmed Aquarium Accessory adaptor 2 sizes
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I made this so that I could securely clamp my automatic fish feeder onto the rim of my Marineland 65gal reef tank.
The vertical portion is the same thickness as the tank rim, and there are 2 different length mounting brackets uploaded here. The 5/16" - 18 screw is used on both lengths. 1 screw on the 1.5" bracket and 3 screws on the 6" bracket. The screw is made to be a standard ANSI 5/16-18 x 1" screw, so you could technically just buy screws at the hardware store.
One of the photos shows the feeder attached to the rim itself and another showing it attached to the bracket.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:No
- Supports:Yes
- Resolution:Standard
- Infill:20%
- Filament brand:
Creality
- Filament color:
Gray
- Filament material:
PLA+
- Notes:
The screw holes did not print very cleanly, so I increase the wall thickness to 3 lines to give me some extra plastic to run a tap into the hole, and a die on the screw to clean it up.
Tags
License
Rimmed Aquarium Accessory adaptor 2 sizes
by RacerX8300 is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
osVAC新型法兰饼夹具（M25）2024-03-17 -
SNZB-04户外箱2024-03-20 -
Lian Li O11 Vision LCD Holder Sensor Panel2024-04-07 -
罗利玩具拖车侧板固定钩2024-04-08 -
用于在Flyingbear Ghost 5上安装BIQU H2 Lite的3D模型2024-04-24
最热下载
-
人耳道2023-03-26 -
GPD Win 2 高性能3D工作站2023-04-30 -
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
18650电池存储盒2024-04-18
最新模型
-
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
高跟鞋鞋架2025-07-17 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16 -
一体打印行星齿轮2025-07-15 -
大码动漫女战士2025-07-15