电线盒

Wire box

2023-08-25 17:32:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This object is a simple box with two holes designed to cover plugs, sockets, terminals or simple wire solded unions with no screws or bolts.

I designed it to cover a descendent wire from my kitchen wall (close to the cooker), and I did not want to drill the upper cabinet (see photo). The box can be sticked with double-sided tape faced down to bring an easier access to the box content when sliding the lid.

Post-Printing

Tightness

Horizontal expansion could be necessary to be set when printing the sliding lid, as it may be extremely tight (which IMHO is good in this particular case), but as much as it can not slide or fit in the box.