货架固定装置适用于Ezviz监控摄像头

Shelf mount for Ezviz surveillance camera

2023-08-25 23:08:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I wanted to mount the surveillance camera on a slightly higher shelf to monitor the whole environment and above all the children's play on the floor but the downward angle allowed by the camera is rather limited so I designed an inclined support on which mount the bayonet support supplied and ensure full stability of the whole, without having to screw it onto the wall or onto the shelf.
Print even with a rather high layer thickness (0.28 mm), with a number of at least 4 perimeter walls and 4 upper and lower layers, even with a low filling of 5-7%. The dimensions of the round recess on the upper face allow you to fit the bayonet accessory supplied with the cam without having to use glue or screws.