Quadrajet 手动油门适配组件
Quadrajet Hand Throttle Adapter
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
Made this to create a secondary attachment point for a hand throttle cable on my truck. There are several videos of people online making a hand throttle for manual transmission vehicles in the offroad community using a friction shifter from a bicycle. This just slips on over the Quadrajet throttle cable attachment point and you clip the original cable back over it to lock in place. Slip your cable through and put an end on it.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:No
- Infill:80%
- Filament brand:
Overture
- Filament color:
OD Green
- Filament material:
PETG
- Notes:
I used PETG because it will stand up to under hood temps.
Post-Printing
You might have to drill out your hole, you might not. My printer was able to print without any post-processing.
Tags
License
Quadrajet Hand Throttle Adapter
by Big_Goad is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
40×0型风扇安装件(适用于E3DV6型号散热片,中心对齐)2023-05-28
-
MTG 狐狸主题3D计数硬币模型2023-08-05
-
商务卡持有器2024-03-18
-
F1 概念车3(2011)2024-05-05
-
Flick 19E(增强型) - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21
最热下载
-
鸡蛋绘画机迷你(Eggbot衍生版)v1.12025-07-16
-
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14
-
超越IPD板2024-05-03
-
沙箱建筑模型2024-05-08
-
艺术雕像(女性)2025-07-16
最新模型
-
MW4 Madcat MKII 3D模型2024-05-08
-
Delta 36-465桌面圆盘可更换插入物2024-05-08
-
4x4方块连接结构2024-05-08
-
3D模型 GTX 750 GIGABYTE2024-05-06
-
几何球体2024-05-06