Paddle drip ring (divisible)

2023-08-26 03:23:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Divisible kayak paddle drip ring (7,5 cm outer diameter)

All models for kayak drip rings I found so far were designed as a one part ring. My idea was to create a drip ring which can be easily mounted without using tools, regardless of the paddle type. So I've chosen a multipart approach. The outer diameter of the ring is slightly larger than the factory ring (plus 2 cm).

The drip ring consists of two halves which will be joined by two sturdy clips. The inner diameter of the ring is 28 mm which fits exactly for the paddles of my Decathlon Itiwit X100 kayak. I've tested the rings under real life conditions and I don't want to miss them ;-)

Please let me know when your paddles have a different diameter. Maybe I can create and upload another size as well.

Assembling instructions: The clips will fit very tight on the ring, so don't worry if they seem to be too small on the first attempt. They aren't. You will need some power to slide the clips over the ring. It's a good idea to assemble the ring the first time without the paddle. The second time it will be easier.

Printing instructions: The clips must be printed with support. The type of filament doesn't matter. You can print it with ABS, PLA, PETG or TPU.