巴厄 20V电池平衡充电器连接端口

Bauer 20V Battery balance charger connector

2023-08-26 04:16:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Quick and dirty remix of original:

Adjusted some dimensions to tighten up the fit
Added new connector holder for extra pins in order to provide balanced charging

The pins used are standard Dupont crimp connector, as well standard 0.250" spade crimp connectors. The spade connector I used were red ones, with a neck diameter of just under 3mm. The spade connector was soldered so as to retain the round shape. The pins and wires are then placed in the appropriate holes and superglued in place. Note: use a bit of baking soda to fill the gaps before applying the glue. The connector mount is fastened with 2mm screws. Yes, this is a quick and dirty solution, I was too lazy to design removable pins. STEP files are included for anyone who wants to go to the trouble.

I used R/C balance chargers I already have and they use the standard JST connector for the balance connections.