地生之人的巡逻队组织者

Earthborne Rangers - Organizer

2023-08-26 04:16:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Earthborne Rangers is a great card game. Unfortunately, the same cannot be said about the included inlay. The compartments are impractical and open at the bottom, the card dividers are too low even without sleeved cards, and there is no solution for the tokens either. Therefore I designed an inlay that should solve the problems at least partially. A total of 3 boxes are needed. I kept the tolerances loose to make the individual boxes easy to remove and setup. The number of dividers can be chosen according to personal needs. About the nomenclature:

[Box-wSlots]: These boxes have slots on the sides to firmly hold the matching dividers in place
[Box-NoSlots]: Those who prefer only loose dividers can choose these boxes
[Divider-wTeeth]: These dividers have teeth on the sides to anchor them in the slots of the box
[Divider-NoTeeth]: Do not require slots in the box, but are simply inserted into the compartments
[Divider/Box-wCard]: The card dividers supplied in the game can be inserted into these dividers to raise them by approx. 5mm and thus make them easier to recognize. I recommend (apart from the box) a layer height of 0.15mm to hold the cards smoothly and firmly. They also need to be printed upright, so a brim may be needed (on my Cool Plate it works fine without a brim). If you choose to use card dividers with teeth you'll also need to print with support!
[Divider/Box-NoCard]: These dividers do not have a compartment for the game card dividers.
[Divider-wFlag]: These card dividers have a small flag on the right or left that can be labeled with a sharpie. Or you can insert your text with a suitable slicer in the appropriate place and print.

I wanted to create suitable solution for the tokens, but unfortunately I don't have the time at the moment. Perhaps someone would like to create a remix?
I have added the Fusion 360 file and will be happy to provide my dxf sketches at any time. Feel free to improve, adjust, extend or ruin the models. The only thing I would hate to see is someone on Etsy making my work their money. It's free for the community, and I want to keep it that way.

A few final words: I appreciate the attempt of Earthborne Games and Frosted Games to focus on sustainable production conditions. My plastic insert is diametrically opposed to this approach, I am aware of that. Please at least consider using biodegradable and/or recycled filament.