带排气设计的曼达洛面具（纳夫）3D模型

Vented Mandalorian Mask for Nerf

2023-08-26 08:28:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Remixed Bozzy1979's design to include air holes to be used as a mask for Nerf.

Some Nerf darts hit pretty hard so i wanted to make my own mask to protect my face during gameplay. I cut the mask in half to protect my face only and to be much lighter and cooler during gameplay. The holes in cheeks allow for airflow and to prevent fogging of the visor, and i made the holes slightly smaller than a Nerf dart so hopefully none get through. I wouldn't use this for airsoft unless you can print it in TPU, otherwise it will just break from bbs.

I printed upside down with lots of tree support, scaled down its not full helmet size but its plenty to protect my face.

How I Designed This

Cut in half in meshmixer and then used tinkercard to add holes in the mask. Used meshmixer to reduce the ears to be flat so i can add my own custom ears.