Hollow Ember Link Horns

2023-08-26 10:55:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is part of my Ember Link Cosplay that I designed in Blender. I am not that great at texturizing, but it does have a little bit of a sculpt on it for the scaly pattern. The main thing I wanted to accomplish was getting lights on the inside.

I ended up printing each horn in two halves (mirror for the other horn) at 0.2mm with supports. The inside is lined with shipping foam and then a wire with a few LED lights (7 red, and 1 yellow at the tips). One 9v with a switch goes around to the back of the headdress.

It was printed with translucent clear, considerable sanding and finished with light brushing of white acrylic and mod podge.

The rest of the headdress is a mix of craft foam, moldable foam, felt, acrylic paint, and a LOT of bobs glue and hot glue.

I have a pretty small head, so you may want to resize.

9.13.23 edit: added the templates I made for my ember link tabard pieces, part A and B of one long photo, so there's a little overlap. I printed them full size on regular letter paper. Then used them to cut them out of Eva foam. Beveled the edges, heat sealed, and painted them with acrylics and mod podge.