Voron 2.4 顶部帽子模组

Voron 2.4 Top Hat mod

2023-08-26 14:29:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Please find installation instructions - and most up-to-date STL/3MF/Fusion360 350/300/250mm files here https://makerspet.com/blog/voron-2-top-hat-mod/.

Voron 2.4 print volume height comes up short of the advertised 350mm (or 300mm, 250mm) - quite a bit - especially when using the StealthBurner extruder and/or PTFE filament tubing. Here is a "top hat" volume height extension that you can 3D-print and mount on top of your Voron 2.4 (or Voron 2.4r2).

This mod sits between your Voron 2 frame and its top see-through plastic sheet. Specifically, this top hat fits into the existing 2020 aluminum extrusion slots on top of your Voron2 - and reproduces 2020 extrusion slots (in plastic) on its own top, so you can re-affix the see-through plastic sheet.

Word of caution - when printing at Z height above ~310mm, keep your minimum Y at 20mm. Otherwise Stealthburner can collide with your Voron 2.4 frame.