Pass & Seymour Media Box Low Voltage Bracket Tabs

Pass & Seymour Media Box Low Voltage bracket tabs

2023-08-26 17:38:40

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Pass & Seymour Media Box Low Voltage Bracket Tabs

Summary

These are the little low voltage mounting tabs for Pass & Seymour Legrand recessed media wall boxes. These are the little tabs that lock in place so you can screw a wall plate down without needing a whole low voltage box or ring. Remixes are welcome as this was a fairly quick, not pretty but functional piece so I can finish a little project of mine.

Print Settings

Rafts:
Yes
Resolution:
.1
Notes:
This should be in the correct orientation for printing, at a 45 degree angle so supports aren't needed but I recommend a raft for bed adhesion unless you have this dialed in really well on your machine. I printed in PLA. The first file is a tight fit, the file with "modified" in the name has a .20mm larger gap for the media box panel. The first file I printed, the little locking tabs broke off but my bracket tabs fit so tight it didn't need them. The manufacturer has said they don't make these available so I made my own, pretty close to a duplicate of the original. Enjoy.