Intercom Eja V6 Pro 带式扣件

Intercom Ejeas V6 Pro Belt Clip

2023-08-26 20:21:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I have created a simple mount for the Ejeas V6 PRO intercom. There is a high probability that it will fit the V4 model and other intercoms with the same mounting system.

Some people use intercoms for activities like cycling or horseback riding. The basic clip is not good and doesn't hold onto belts/pants/clothing properly and the intercom is upside down. This clip solves that problem.

Note: To print the mount correctly, you need to use supports, check Misc Notes

Print Settings

Printer brand:
Kingroon
Printer:
Kingroon KP3S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.28
Infill:
20
Filament brand:
PlastSpaw
Filament material:
PLA
Notes:
Please check the support settings - I changed the angle to above 80% to prevent supports from generating in the holes. Additionally, I reduced the support density to 10% and set the support Z distance to 0 mm. The minimum support area has been changed to 5 mm2.

With these settings, it works fine for me. Remove the supports using a tool and clean up the edges.