筷子收纳架

Chopstick takeaway shelf

2023-08-26 23:05:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Here's a chopstick-takeaway shelf. I made one because:

-Wanted a pegboard but too cheapskate to buy one
-Have too many disposable chopsticks
-Have too many reusable takeaway containers
-Have too many things cluttering my workstation

The chopstick holder is meant for chopsticks with 5mm diameter.

Instructions:

Use double-sided tape to stick the 1 holder to the wall (I have a melamine wall, not recommended to do this on a painted wall).
Stick the other holder based on the width of your takeaway container.
Trim your chopstick with a knife/wire cutter/saw/whatever to your liking.

Working principal:
The "lip" of the container should be resting on the chopsticks. For additional grip on the chopsticks, close the container lid. This design is not earthquake-safe.

Print Settings

Printer brand:
Kingroon
Printer:
Kingroon KP3S
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
15%
Filament brand:
unknown
Filament color:
Gray
Filament material:
PLA+ (polymer composite)

Tags

chopsticks recycle shelf takeaway

License

CC BY

Chopstick takeaway shelf
by chapapa123 is licensed under the Creative Commons - Attribution license.

筷子收纳架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）
2023-03-26
六边形台阶花盆
2023-09-16
Seestar S50 镜头罩
2024-01-11
Dust Filter Filament
2024-02-04
法拉利SF-24 3D模型
2024-05-01

最热下载

ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）
2023-03-26
Voith Schneider 螺旋桨 VSP
2023-04-11
高尔夫球支架 / 展示架 / 陈列架 / 收纳架
2024-03-29
适用于ebyte E104-BT5040U USB适配器的外壳
2024-04-28
HGX lite v2支架
2025-07-18

最新模型