Logitech Pro Flight油门的持有者

Holder for Logitech Pro Flight throttle

2023-08-27 00:56:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/jTKLfd3OcfW

You will need to cut a section out of the back for the cable and if needed put your own screws in to ensure the throttle sits in secure.

Feel free to make this design some what better as I have included the Gcode file, so you can place the gap for the rear cable in by design or put in the screw holes in the correct place.

Screw borrowed from https://www.thingiverse.com/pwalter824 design to keep things the same.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1
Rafts:
Yes
Supports:
Yes
Resolution:
Standard 0.2
Infill:
30%
Filament brand:
XINGTONGZHILIAN
Filament color:
White
Filament material:
PLA
Notes:
Use tree supports where required.

Post-Printing

You may want to split the screw from the bracket for easier printing. May also want to consider reducing the screw a little for a better fit, increase the height of the sides, thicken the bracket a little, sclae it for a bigger table etc.

How I Designed This

Designed with a set of calipers and Tinkercad. My first proper design so apologies if the measurements are out slightly but will be by millimeters if that for a snug fit.