Raspberry Pi Zero Holder x8
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A remix in TinkerCad to hold a larger number of Raspberry Pis by fusing the parts together and doing a little cleanup. I haven't checked to see whether Pis with headers will fit, but I hope this helps someone else who has purchased too many of these things.
The original had board PCB slots of 1mm, which were way too thin. The boards are 1.45-1.6mm thick, and there wasn't enough spacing for headers.
So the updated version:
1) is fixed storage for 8 Pis.
2) has a looseer (1.8mm) fit for the boards
3) has spacing for headers, which are 11-ish mm
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 S1
- Rafts:No
- Supports:No
- Resolution:.2
- Infill:10%
- Filament brand:
Overture
- Filament material:
PLA
Tags
License
Raspberry Pi Zero Holder x8
by miltonentente is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
可爱的大眼睛（手机版）无镜片3D模型2023-03-26 -
二战时期德国的可移动防弹室3D模型2023-03-28 -
手枪弹匣（边缘型）3/4部分2023-05-01 -
保时捷968型号前置和（敞篷）后置 4英寸扬声器支架2024-03-23 -
ZOHD Altus 大疆 O3 前部2024-04-29
最热下载
-
Valorant 杰特的姿态2023-03-26 -
螺旋锥形手玩具（全新）2024-05-08 -
厨房水槽滤网过滤器2025-06-05 -
巴黎卢浮宫的三圣母像2025-07-16 -
HGX lite v2支架2025-07-18
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
一体打印活动关节熊猫和支架2025-07-25 -
性感美女3d人像（带基座）2025-07-17 -
关节活动人，假人13,Dummy 132025-07-02 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24