Graflex镜头板3D模型
Graflex Lens Boards
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a Work-In-Progress. After owning a few lenses I needed Lens Boards to mount them. Included are the following.
Blank 2mm thick "Center mark is for a 6mm or 1/4 inch drill bit hole saw"
Blank 4.1mm thick "Center mark is for a 6mm or 1/4 inch drill bit hole saw"
Compur 33mm hole
Copal 0
Copal 1
Graphex 90mm
Graphex 135mm
Main Thickness difference between the 2mm and 4.1 is the lens flange nut. The Older lenses that this camera came with want a thicker board but lenes that come in copal shutters want thinner boards.
Print Settings
- Printer brand:
Anycubic
- Printer:
Kobra Max
- Rafts:No
- Supports:No
- Resolution:0.3
- Infill:100%
- Filament brand:
Sunlu
- Filament color:
Black
- Filament material:
PLA
Tags
License
Graflex Lens Board
by darkskyy is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
骷髅国际象棋套装2023-03-26 -
SpaceX星舰S20/B4 3D模型2025-07-15 -
275mm Kallax抽屉托盘印制在200mm床上2024-03-25 -
Woovebox 案例2024-03-26 -
CG工具用于美空军F-222024-05-06
最热下载
-
斯坦利杯2024-01-11 -
吸血鬼之夜2024-01-15 -
二十面体骰子模型2024-03-29 -
NA Miata车灯遮光条折叠机构顶盖2024-04-15 -
沙丘巡游者2024-05-03
最新模型
-
RAM 垂直式笔记本支架2024-05-08 -
适用于 1:10 模型的 DKS-Basic 轮毂2024-05-08 -
伊比休鸽子鸨夫2024-05-08 -
蝴蝶过山车2024-05-06 -
DIY电动车速率保护装置2024-05-06