pi4 with poe hat 6" rack case

2023-08-27 06:42:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

RPI4 case to fit a 6" rack. Just two pieces that snap together (top and bottom). Fan should snap in and the Pi snaps in as well. Also a USB keystone jack snaps into place.

Only 2 of the USB are exposed on the back. One of the other two I have going to the front with a keystone jack and the other I am using to power the fan. I removed the stock POE hat fan as it was really noisy and replaced it with a 10x60mm fan that snaps into the lid. It is designed around HDMI leads that snap into place.

These are the micro HDMI to HDMI cables I used. Others may or may not fit the openings.
https://www.amazon.de/-/en/gp/product/B07VYQQ7K7/ref=ppx_yo_dt_b_asin_image_o03_s00?ie=UTF8&th=1

There is access to the Micro SD card and there are holes to see the power and activity lights on the front.

There is tab on the bottom of the handles so that they can print correctly. You can snap them off after the print is done.

My goal was to make a case that would allow me to use all the ports on the PI4 and keep all the wires inside the rack.

For some reason the lid is showing right side up in the 3d model picture. It should obviously be printed upside down.

Sorry they were really dusty when I opened them up. They have been running for over a year :-)