宝马E36头灯更换指南：适用于FDM Bambu Lab X1C P1P

Headlight Replacement for BMW E36: Split for FDM Bambu Lab X1C P1P

2023-08-27 10:28:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

WIP

Cut it up to try on Bambu lab x1c with overture nylon pa. The OG thing was printed on a SLS printer.

Edit: The corners are not fans of staying down. Nylon got ugly with the corner lifting and ABS has corner lifts but is able to compensate for the lift so the walls above look normal.

Uploading parts with tall brim I added in tinkercad.

Print Settings

Printer:
Bambu Lab X1C P1P
Rafts:
No
Supports:
Yes
Resolution:
0.24
Infill:
100
Filament brand:
Overture Easy Nylon PA
Filament color:
Black
Filament material:
Nylon PA
Notes:
Limit flow to 4-6. Reduce Speeds by 20-40%. Turn the heated bed on like 15min before you start printing so it is good and warm in the enclosure when the first layers are going down.

This works in ABS as well and you can just use normal ABS profiles. If you are getting a corner lift with ABS try decreasing the brim from 0.1 to 0,08 or lower so the big brim has a good hold on the thin part.

Cut og model up to fit on bambu lab x1c.