格里德芬iti可定制分隔容器 - 增强版
Gridfinity Customizable Divider Bins - Enhanced
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Based on Gridfinity Customizable Container by jrouvier2
The original SCAD file did not allow for customization of the following due to true/false issues with Customizer:
- Label
- Finger slide
- Magnets
I have fixed the SCAD to enable these fields.
1 = True
2 = False
You can now enable and disable these features of the Gridfinity bin.
I hope others find this useful as well.
STLs are provided as examples only. Open the customizer to create your own custom bins.
Original description:
Customizable #gridfinity basic container for Zach Freedman's gridfinity system system
The OpenScad that drives this is a minor modification of vector76'es original, basically just putting it all in one file and making the configuration a bit easier.
These containers differ from Zach Freedman's containers in that:
- Holes for magnets are optional
- The shelf for a label is optional
- The finger slide at the bottom is optional
- Magnet holes end in a cone, reducing issues with sagging over the magnet holes
- Magnet holes are sized to 6.1mm so a 6mm magnet should press-fit into the hole without needing glue (you can tune this in the customizer)
Tags
License
Gridfinity Customizable Divider Bins - Enhanced
by kheidolph is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
5英寸照片框支架2023-06-03 -
3D模型标题：用于把手连接的支架夹具2024-01-08 -
摇杆开关固定架 - 丰田RAV4 1994-2000 (XA10)2024-01-09 -
多彩短蛇2024-04-21
最热下载
-
未识别十字架006A，可嵌入盒（v2）2023-03-26 -
开源 1:10 四驱竞技型 RC 车2025-07-08 -
生态FLOW EcoFlow Wave 2风扇系列,EcoFlow Wave 2通风口2024-02-05 -
俄亥俄州日全食针孔观察器2024-05-03 -
幻想磁力2024-05-03
最新模型
-
3D 打印遥控刷式喷气推进船（喷气船）2025-09-15 -
骷髅鸭2025-05-16 -
Sunlu FilaDryer S1 Plus气压计安装支架2024-05-08 -
D8 质数骰子2024-05-08 -
简约墙面键帽展示架2024-05-08