Wing Clip Eflite Beechcraft D18 翼片模型

Wing Clip Eflite Beechcraft D18

2023-09-06 19:24:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Oct 8, 2023
My buddy installed one of these and he said it works great. He said he used the one which looked most like the OEM version.

Sept 5, 2023
This is the male side of the wing tip retention clips found on the Eflite Beechcraft D18

Reverse engineered the OEM clip for a friends aircraft where 1 had broken. The elliptical cutout in this design is smaller to compensate for the reduced stiffness of the filament vs OEM injection molded polymer. Three versions are provided. The only difference between them is the depth of the split line elipse. Shorter will give greater stifness. Longer will be more flexible.

Haven't had a chance to try them on the plane to verify functionality.

CAUTION: Print an extra clip or 2 and manually strength test it to failure before installation. It's stiffness and durability under deflection should be comparable to the OEM clips.

Print Settings

Printer:
Bambu Labs X1 Carbon
Supports:
No
Filament brand:
Bambu Labs
Filament material:
PAHT-CF
Notes:
Recommend using a filament and printer capable of high seam strength. If you fly in a hot place, take this into consideration when you select the filament.
Bambu PAHT-CF worked well for me.

CAUTION: Test printed Polymaker ASA and Bambu PETG-CF. Both were prone to seam failure upon deflection testing.