HoPe Tech 4传感器固定装置
Hope Tech 4 Sensor Holder / Support capteur
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Hope Tech 4 Sensor Holder for bike or electric scooter
The design is symmetrical so you don't need to modify anything in you slicer , just print it 2 time for a pair.
The sensor is hold a bit tight it's normal, this way it can't move freely but you can adjust it to your preference.
You'll need :
-> 1 sensor for each brake lever (remove the double sided tape)
I order this one but adapt at what you need (2pin or 3 pin // NO or NC) just keep the shape https://a.aliexpress.com/_ExjWAGx
-> Magnet 6x2 as the one provided with the sensor are way to big
-> Glue for the magnet
-> A little of double sided tape (see pic) it work whitout but it's better.
I highly recommend printing it in PETG as it use a bit of flexibility of the material to be clip on the master cylinder.
Video test : https://youtube.com/shorts/AVtDOqVcnAE
You like it ? please say me =D
Tags
License
Hope Tech 4 Sensor Holder / Support capteur
by Guibulle is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
最新模型
-
Keebio Iris 15度弯曲中间层2024-05-08 -
纸张 APC T132024-05-08 -
适用于 1:10 模型的 DKS-Basic 轮毂2024-05-08 -
3D模型：TLR-1钥匙的经典与现代版2024-05-06 -
字母数字盘 - 炼金术之星的魔方2024-05-06
最热下载
-
Toyota 22RE发动机扩展套件2023-03-26 -
伊瑟宁加德骰子塔（奥斯坦克）2024-01-17 -
Woods Mower 30922 护盾保持者2024-04-24 -
线框无心2024-05-08
