3dsjs

WOWGO 3D 软性替换轮胎

WowGo 3 Soft Replacement Tire

2023-09-07 17:34:35

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

These TPU tire replacements for the WOWGO 3 skateboard make the riding experience much smoother, they just drop right in place of the original tires no need for anything else.

The motors on the Wowgo 3 will get hotter than usual with the TPU tire on and it will reduce range by at least 20-30% based on my short testing. Use at your own risk, I had no problems riding like 6-7kms with them although as I said the motors were incredibly hot I'd estimate 80-90 degrees C maybe more. I have no idea if this is bad for them or not. They make the ride much softer and smoother especially over rough roads and paths.

Tips for removing the original tires: Make sure the motors are hot (go for a ride and come back) it makes them way easier to get off and use the tool provided in the box, it works surprisingly well.

Print Settings

  • Printer brand:

    Creality

  • Printer:

    Ender 3

  • Rafts:
    No
  • Supports:
    No
  • Resolution:
    0.2
  • Infill:
    50%
  • Filament brand:

    GEEETECH

  • Filament color:

    Black

  • Filament material:

    TPU

  • Notes:

    I used 50% infill which works well and can probably go a little lower or higher depending on what you need from it, I used the grid or lines pattern of infill it worked pretty well.

Tags

License

CC BY

WowGo 3 Soft Replacement Tire
by Why_Not_ is licensed under the Creative Commons - Attribution license.

WOWGO 3D 软性替换轮胎
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢