Wowgo 2s Pro/Max 鼻部护具：低调设计

Wowgo 2s Pro/Max Nose Guard: Low Profile

2024-03-25 23:50:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Protect your board with this is a simple low-profile nose guard for the Wowgo 2s Pro/Max electric long board. I tried to design is so that it could clip on to the truck base but couldn't make it work. So ultimately, I thought it would just be easier to stick it to the nose using command strips (I'll put an amazon link below). Command strips work really well to get the nose guard to stick on and it stays on even when riding on rough roads. It can also be removed (with some force) without damaging the nose. So for me, it works well. We have four Wowgo 2s Max's in our family and I put them on all the boards.

This does need supports to print. I printed my with paint-on supports in PrusaSlicer. I also changed the type to "Rectilinear Grid" pattern which made them easy to remove.

Last thing, if you can print this in PETG, ABS, or ASA. I'm not sure how well PLA would survive outside in the sun. It could get brittle over time. But if you only have PLA, printing in PLA is better than having no nose guards for your board.

Example of command strips:
https://a.co/d/ef4XthX