Cupholder, customizable for IKEA IVAR
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a customizable cupholder. The uploaded STL is for a mug about 86mm in diameter, with a handle that is 16mm wide that, at the handle’s lowest point is 32mm measured down to the base of the mug. It fits an IKEA IVAR bookcase side rail, 14mm wide (it was a tight fit. You might choose a larger value). where the side-rail has 30mm of clearance before you'd hit the shelf.
All of these parameters are adjustable in the customizer.
I printed it in PETG so it would hold its shape even if the mug has boiling hot tea in it.
Print Settings
- Printer brand:
Prusa
- Printer:
i3 MK3
- Rafts:No
- Supports:Yes
- Resolution:0.3mm. Standard 0.4mm nozzle
- Infill:10%
- Filament brand:
don't care
- Filament color:
white
- Filament material:
PETG
- Notes:
Used PrusaSlicer paint-on supports for just the straight underside of the lip. Bridging between the cup and the lip works just fine.
Tags
License
Cupholder, customizable for IKEA IVAR
by DavidPhillipOster is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
Makita 12V 工具架2023-04-26 -
LDRC Drift Extended Axle with Spacer2024-03-21
-
Mulita 教育机器人 2.02024-03-25 -
SH型森林装备杯形适配器2024-04-20 -
用于Raspberry Pi高质量摄像头的D型安装适配器2024-05-08
最热下载
-
伊瑟宁加德骰子塔（奥斯坦克）2025-07-16 -
奥迪奥技术卡 ATH-M40x 连轴器2024-03-23 -
Articulated Snake2024-03-30 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
泰坦电视核心升级，升级版泰坦巨人核心2025-07-16
最新模型
-
冷却风扇导管（MK8挤出机）重制版2024-05-08 -
第18款磁吸套（用于TF背部带子）2024-05-06 -
蝴蝶过山车2024-05-06 -
后座椅固定销装饰环2024-05-06 -
飞机EGT模型2024-05-06