6.5x52 Carcano托盘

6.5x52 Carcano Tray

2024-01-19 10:33:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A small remix of the rimless ammo holder for Baldovino's ammo box for rifle rounds.

I wanted to make this to hold my 6.5x52 Carcano rifle cartridges, but I found that they wobbled around too much in the included 6.5x55 Norma tray.

So I shrunk the dimensions of each square from 13mm down to 11.5mm which is much closer to the 6.5 Carcano's rim diameter of 11.42mm. This had the added benefit of creating enough room for two extra spots, so this tray holds 22 rounds instead of 20.

My cartridges fix snug enough to not wobble around, but have enough space to be removed easily without snagging. Theoretically, this would work for any rimless rifle cartridge with a rim diameter of less than 11.5mm.

Literally all I did was shrink the size of the holes the cartridges go into and add an extra 2 slots into the extra space, so it's fully compatible with Baldovino's original ammo box and lid.