即印牌盒（标准52张）

Print-in-Place Deck Box (Standard 52-card)

2024-04-13 02:42:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This an (over-engineered) box for a standard deck of 52 playing cards designed to be print-in-place with no supports. It is designed with a unique hinge mechanism that obeys good design practices for 3D printing and does not need support.

It has an overlapping latch to lock closed.

4 Versions!

Hex-pattern top and bottom (0.2mm tolerance gap between hinge components)
Hex-pattern top and bottom (0.3mm tolerance gap between hinge components)
Non-pattern (flat) top and bottom (0.2mm tolerance gap between hinge components)
Non-pattern (flat) top and bottom (0.3mm tolerance gap between hinge components)

I can't test every printer configuration, so I'd love your feedback!

I have more variations of this deck for individual deck games (UNO, Wildcard UNO, Taco Cat Goat Cheese Pizza, etc.) available on my Cults 3D Store at:
https://cults3d.com/en/design-collections/Siamese-Engineering/siamese-engineering-designs

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
0.4mm
Infill:
20%
Filament brand:
Hatchbox
Filament color:
Magic Stone
Filament material:
PLA
Notes:
Because this box has a lot of narrow "hallways", I use 6-8 walls (with inner walls at 100% speed) to expedite the printing process and solidify the walls.

I also recommend printing walls "outer to inner" to minimize risk of rotating parts bleeding together.

Print without supports.