令牌盒：用于《红龙酒馆》故事系列的3D模型

Token Box for Tales From The Red Dragon Inn

2024-01-15 13:42:19

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A set of stackable boxes designed to store and organize the many many tokens from "Tales from the Red Dragon Inn". The boxes and lid have 4 magnets in the corners to keep them closed. And if you get your polarities right you can stack them in any order.

The box is 200mm long so it can be printed on most printers, and was designed to just fit in the game box height wise.

Right now it includes space for all of the basic tokens:
Cooldown, Charge, Trap
Damage (1, 3, 5, 10) , Weakened
Shield, Power, Evade, Toughness

I plan to update / expand the design when I need space for the tokens unlocked later in the game.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20%
Notes:
When I printed this I used AMolen Wood (bamboo) PLA because I liked the look of it, but the material you use doesn't matter.

Post-Printing

Installing the Magnets

I designed this to use 6mm x 2mm magnets with a slight press fit.
Specifically I used these magnets: https://www.amazon.com/dp/B09BB1CQMK?psc=1&ref=ppx_yo2ov_dt_b_product_details

Due to tolerances in the printing and the magnets, sometimes it's harder or easier to press them. Some I could press in by hand, others I had to use a hammer to tap them in. If there seems to be material in the hole blocking the magnet, I scraped / cut it out before pressing in.

Also be sure to get your polarities right when installing because they're difficult to remove once installed. If you get them all polarized right the boxes should be able to stack interchangeably. If not you're stuck with 1 orientation.