Frosthaven代理：收集者

Frosthaven Boss Proxy: The Collector

2023-09-07 17:36:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Here's my proxy model for the Frosthaven boss, the Collector! There's not a huge footprint on this guy, so if you're printing it directly on the bed, I'd recommend putting a support point or two on the “leg blast” so that it doesn't get knocked loose during printing. Other than that, it's a pretty straight-forward print with support needed in the obvious spots.

As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!