北约标志钥匙扣
NATO emblem keychain
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a 60mm circle keychain with the NATO/OTAN logo on it.
It is designed to be printed on a single-extruder printer like the Ender 3 or Anycubic i3 mega s (which I used to print). You will need to:
- In CURA, go to extensions>post-processing>modify g-code.
- Set layer height to 0.08mm and 0.16mm for the first layer.
- Add 3 "filament change" scripts for layers 3, 5 and 6. (check the screenshots)
- Slice it and send it to print with the WHITE filament.
- When the printer stops at the 3rd layer, change filament to BLUE and unpause it.
- When the printer stops at the 5th layer, change filament to BLACK filament and unpause it.
- When the printer stops at the 6th layer, change filament to BLUE filament and unpause it.
The layer of black filament will make the blue layers that come afterwards look darker than the ones coming after the white layers.
Make sure you use filaments that at least have the same melting point (ideally from the same manufacturer.
Enjoy your freedom keychain!
Print Settings
- Printer brand:
Anycubic
- Printer:
i3 Mega S/Pro
- Rafts:No
- Supports:No
- Resolution:0.16 for the first layer, 0.8 for the rest
- Infill:0%
- Filament brand:
-
- Filament color:
White, Blue, Black
- Filament material:
Make sure to use the same througout the print
License
NATO emblem keychain
by DanyloG is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
最新模型
-
Wii 遥控器（同步按钮）3D模型2024-05-08 -
Fractal Design Define R6 标准12mm按钮基座2024-05-08 -
装饰风瓶2024-05-08 -
1/56 比例（约28毫米）戈瑞什小人2024-05-08 -
蝴蝶过山车2024-05-06
最热下载
-
空客操纵杆配备控制杆固定装置2024-03-30 -
远投笼2024-04-06
