Duratech TS-1554 20瓦特

Duratech TS-1554 20w

2023-09-07 20:40:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a quick Model of this common Jaycar brand soldering Iron in case someone wants to make anything for it. Made as part of a project I'm in the middle of I figured in case someone else needs a relatively accurate scale Step of the soldering Iron I would upload it here and hopefully to Grab Cad as well. Measurements should be within 2% please notify me if any obvious errors are found so I can work on an updated revision.

I don't know if I would print this unless you're looking for a fit prior to purchasing this Iron.

How I Designed This

Design process.

Each section was measured the value entered into a sketch on the front plane with the center line being a backbone along the entire model continually referenced back to. After each part was measured, sketched and halved it was revolved into the piece as required.
Overlapping parts had previous steps redone as removals or intersections to allow for the individual parts to shine through. This is part of a whole design but thought others may appreciate it before the rest is completed.