Elegoo Phecda激光雕刻/切割支撑架，螺丝固定架及吸力固定架

Elegoo Phecda Laser Engraver/Cutter Risers, Screw Mount, and Suction Cup Mount

2023-09-08 02:18:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I made these for my newly purchased Elegoo Phecda 20 Watt Diode Laser Engraver/Cutter.

The risers screw into each other and raise the Z axis by 50mm each. They are compatible with the factory OEM risers.

The screw mount holds the risers in place for perfect placement.

If you don't want to screw into your workbench I also made suction cup mounts. The bonus part with the suction cup mounts is they allow you to engrave on slanted surfaces such as your windshield or car hood for example. If anyone does that, please post pictures.

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Max
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Filament brand:
Elegoo
Filament color:
Any
Filament material:
PLA
Notes:
If your printer has good part cooling the riser top portion should bridge fine. If not you can use a support like a tree support, but I didn't need to.

The suction cup mount should accept a standard suction cup, I made a small and larger hole design. It's recommended that you silicon or glue in the suction cups to the mount so they don't have any shifting in the x or y plane.