EDF 64mm叶片住房（内径：64/64.5/65mm）

EDF Housing for 64mm blades (64 / 64.5 / 65mm internal diamention)

2023-09-08 02:32:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

EDF printed because the original one was a little bit too small

Internal dimension is 65mm instead of 64 to prevent rubbing but I see some space between wall and propeller, so I think it can be lowered about 0.5 and still fit without rubbing but I didn't tested. This dimensions are good enought for me, so I upload the photos of my 65mm and also stl files for 64.5 and 64mm if someone need ultra fine fit.
If You decided to print smaller one please leave an information for others how it works

outer diameter = inner + 4mm (2x 2mm wall)
hooks: 3.5mm x 0.8mm (for best print with 0.4 nozzle)
mounting wholes: 4x 3mm on 8mm radius

(this is my engine model: https://s.click.aliexpress.com/e/_Evp1SiX )

Used material: PLA Impact - Fiberlogy
Layer height: 0.12 mm
100% infill from walls