奥斯特冰淇淋制作机盖 3D模型

OSTER Ice Cream Maker Lid

2023-09-08 02:32:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a replacement lid designed for the Oster 4-quart wooden bucket ice cream maker. The lid is printed in three distinct parts: the Lid, Window Pane, and Gear.
Creation Process:

I used a 700mL Smartwater bottle as the window "glass". After cutting it open, I flattened it on my workbench and clamped down the edges.
I then adhered the "Window Pane" to the inside of the flattened bottle using super glue. After clamping it for stability, I allowed it to dry for a few minutes.
Next, I trimmed the excess plastic from the outer edge and the inside of the large hexagon.
Note: Initially, I tried using a heat gun to flatten the bottle, but this method was unsuccessful.
The window pane fits snugly into the lid, so there's no need for adhesive. This makes cleaning simpler. However, if you choose not to glue the pane in, trim the window a bit larger than necessary and fit it in.
I've also provided the Fusion archive file for those who might want to adjust the interior diameter of the lid. I've set a parameter for this specific adjustment. On my end, the lid fits tightly onto the bucket, necessitating placing the bucket on the floor to secure it. It's essential for the lid to be tight as the ice cream maker rotates the drum by the lid.
This design has been tested on the ice cream maker. The next step? Testing it while making some delicious ice cream!

Print Settings

Printer brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
draft.32
Infill:
25
Filament brand:
amazon basic
Filament color:
white
Filament material:
pla
Notes:
The Gaer loads into cura upside down so just flip 180, nozzle .8mm, top and bottom thickness 1.28 mm wall thickness.8, 3 walls layer height .32