虚拟现实冰淇淋玩偶定制箱子v1.0 - 适用于D1 mini、TP4056和BMI160手动焊接

slimeVR Frozen slimes v1 custom case - for D1 mini+tp4056+BMI160 manual soldering

2024-03-27 02:41:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

虚拟现实冰淇淋玩偶定制箱子v1.0 - 适用于D1 mini、TP4056和BMI160手动焊接

Summary

This is a customized frozen slimes v1 case for slimeVR FBT trackers, for use with WEMOS D1 mini, TP4056 and BMI160
The original is designed to fit a custom PCB for connecting everything
Since I don't have access to PCB manufacturing services, and i don't feel like making double sided pcbs with the thermal transfer method, i remodeled it to fit individual modules into slots for connecting everything manually with wires, and also a cutout to fit a popular KCD-11 switch
I have built a fully functioning 8-piece set for a friend using this model
Since the case has very little internal space, wires should be as short and as thin as possible
No changes made to the model other than the internal space and a switch cutout, original endcaps and battery housings will fit as usual

Printing: no particular recommendations, PETG or PLA with 20-25% infill, no supports

Post-printing: follow the original author's instructions linked below. Add M3 threaded inserts, solder the protection diodes and battery sense resistor, connect everything else with wires as shown in original schematics, press in the KCD-11 switch (you'll have to squeeze the springy bits with pliers, there's a tight fit). I added some hot glue to wire ends and to hold the PCBs in place. Connect the battery, slide it in the cap slot, close everything together. I hot glued the case parts together to be sure.

Link to a module template used to create slots for PCBs: https://www.printables.com/model/443000-wemos-lolin-d1-mini-v4-tp4056-bmi160-holders-slime

Link to original frozen slimes Github: https://github.com/frosty6742/frozen-slimes/tree/main?tab=readme-ov-file#Case

Link to slimeVR documentation: https://docs.slimevr.dev/index.html