章鱼形酒品盖

Octopus wine stopper

2024-03-17 04:48:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Had so much fun playing with Dr Lex's octopus that I had the idea of seeing it as a stopper on a wine bottle.

Couldn't just add the stopper without allowing for a super high set of rafts for each leg.
So I made a separate stopper with wide threads, and cut an slightly oversized receiving thread into the octopus' body. (the original 'close fit' created in Blender was a little too tight)
Also added a little 'debris cutter' at the tip of the stopper to remove any printing debris from the inner threads of the octopus.

Came out great! Threads easily and holds well. I'll post a make on the male thread and female thread mold to adapt this for other toppers beside Dr Lex's great octopus !! :)

Print Settings

Printer brand:
QIDI
Printer:
S-Box
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20% cubic
Filament brand:
Hatchbox
Filament color:
White
Filament material:
ABS
Notes:
printed fine with no supports on my QIDI X-Max 3
May need supports under the thread receiver on the octopus, depending on your printer and settings.