超长焦距快门按钮手柄

Super Telephoto Handle Shutter Button

2023-09-08 04:17:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Remote shutter that can be bolted to a tripod foot for easy ground level shooting (flippy screen camera and super telephoto lens not included).

Print Settings

Printer brand:
Anycubic
Printer:
Kobra
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
solid
Filament brand:
Overture
Filament color:
Black
Filament material:
PETG
Notes:
Designed to be super simple and quick to print. Took about 40 minutes.

Post-Printing

Materials, Tools, and Assembly

4.7K resistor (I don't know if this is actually required, does work without but included for good measure to reduce risk of damage to camera)
2.5mm headphone jack cable ~12"
1/4-20 socket head screw, 5/16" long.
2x 6mm square buttons
Gel super glue
Solder

Tools: 3D printer, soldering iron, wire cutter/knife

For my cable white is ground, red is shutter, and green is focus. See diagram from http://www.doc-diy.net/photo/eos_wired_remote/ for plug pin-out.

Assembly:

Solder the resistor to the ground cable, then the other lead to the two buttons.
Then solder the other two wires to the other leads on the buttons.
Glue all of the parts together. I used gel super glue.
Screw to tripod foot.
Take picture of bird.

License

CC BY

Super Telephoto Handle Shutter Button
by samweiss is licensed under the Creative Commons - Attribution license.

超长焦距快门按钮手柄

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

最新模型

最热下载