快门倾斜支撑固定装置
Shutter tilt bar pin
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I used PC because it is a small component and will undergo reasonable stress. I rotated the STL to have the bottom of the "T" track on the bed and I used tree supports from the bed to support the overhanging pins and the suspended portion of the "T" track. The piece is pretty difficult to put into the shutters as PC doesn't have too much flex but its in there now and seems to work just fine.
The track segment is overall 1.3" long. My shutters had around 1/2" of overhang from the top pin to the end cap. I simply removed 1.3" from the existing track and pushed the new part into the tilt bar.
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu X1C
- Rafts:No
- Supports:Yes
- Resolution:0.12mm
- Infill:15%
- Filament brand:
Bambu Labs
- Filament color:
Clear
- Filament material:
PC
Post-Printing
I just broke off the PC tree supports.
How I Designed This
Solidworks and calipers.
License
Shutter tilt bar pin
by laithc is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
弗朗西斯涡轮机3D模型2023-03-26 -
6S Tattu V.5 1200 Battery Holder2023-08-08 -
Mobula 6盒3D模型2024-01-17 -
乒乓球无气2024-04-22 -
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17
最热下载
-
SpaceX星舰S20/B4 3D模型2025-07-15 -
空客操纵杆配备控制杆固定装置2024-03-30 -
超越IPD板2024-05-03 -
用于Raspberry Pi高质量摄像头的D型安装适配器2024-05-08 -
比基尼模型2025-07-16
最新模型
-
兔女郎半身像2025-07-15 -
3D Pokemon 卡牌盒2024-05-08 -
美国机甲——印度神灵MK-72024-05-08 -
万用表壳2024-05-08 -
法基尔2024-05-06