Landroid轮子灵感来自宝马

Landroid wheels inspired by BMW

2023-09-08 04:17:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

After about 4 years in my rough garden, it was time to replace my previous wheels (thing:3750909). This time I did not care about material saving, print time or anything like that, I just wanted to make some nice looking wheels!

From my previous design, I extracted the studs and then made a new design based on the wheels on my BMW. When it was done, I also made a cap to cover the nut holding the wheel.

I haven't tested this design, but its made in the same way as thing:6207369 I published today, so it should fit well!

The cap snaps in place, but has a tight fit and brittle tabs so take it easy when mounting them. I added some slots to fit a screw driver when they need to come off.

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0,15 mm
Infill:
20%
Filament brand:
Prusament
Filament color:
Galaxy black
Filament material:
PLA
Notes:
Should only need support for the hexagonal part. The rest of the wheel should print just fine without support.