Retevis RT95 / Anytone AT-778UV 无线电站架，可定制其他无线电设备

Retevis RT95 / Anytone AT-778UV Stand (Customizable for other radios as well)

2023-09-08 04:31:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Retevis RT95 / Anytone AT-778UV 无线电站架，可定制其他无线电设备

Summary

Print 2x of the bars and 2x of the sides.

The top notches are not a tight fit and you may want to open the scad file to make them a bit tighter by reducing the newly added parameter "BraceDepth"

Print Settings

Printer brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
No
Infill:
15
Filament brand:
IIID MAX
Filament color:
Black
Filament material:
PLA+

Post-Printing

Some light sanding may be necessary to fit it together gently.
You can then either glue it in place or it should be a tight enough fit without glue if you want to leave it loose to be disassembled.

Some rubber bumpers can be added to the bottom of the stand to help keep it in places while pressing buttons.

How I Designed This

This is based on the Customizable iPad Stand, I added a new parameter for setting the brace depth that allows it to be customizable to fit other radios as well