Nitecore NB10000 头盔 3D模型

Nitecore NB10000 Cap

2023-09-08 05:11:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The Nitecore NB10000 GEN2 powerbank has a flaw in that if the button is pressed for more than 10 second it goes into a lock-down mode and cannot be used until its charged again. This can easily happen if its packed together with other items that accidentally presses the button. This lightweight 3d printed cap protects the button from accidental pressing.

Available in two variant:
Stiff - To fully prevent the button from being pressed. Print it in TPU Shore A95

Flexible - The button can still be pressed to check charging level or to switch to the "low power mode" but it requires alot more force to do so than with out the cap. Print it in TPU Shore A85

Please note the different TPU shore values for the intended function

Its also available for sale on my Etsy shop
https://verkstan.etsy.com/se-en/listing/1560858133/nitecore-powerbank-cap?utm_source=Copy&utm_medium=ListingManager&utm_campaign=Share&utm_term=so.lmsm&share_time=1694119999988

Print Settings

Rafts:
No
Supports:
No
Resolution:
0.4
Infill:
100
Filament brand:
Extrudr Semi-seft or Extrudr Flex Hard
Filament material:
TPU
Notes:
Print it with the top down.

Available in two variant:
Stiff - To fully prevent the button from being pressed. Print it in TPU Shore A95

Flexible - The button can still be pressed to check charging level or to switch to the "low power mode" but it requires alot more force to do so than with out the cap. Print it in TPU Shore A85

Please note the different TPU shore values for the intended function