Nitecore Tini2 自行车支撑架

Nitecore Tini2 bike support

2024-01-14 00:13:17

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Nitecore Tini2 tpu case with collar support for bike.
Case is removable from the collar. “Coda di rondine” (dovetail?) mount.
The project is already printable but i’d like to refine the case for a safer insertion of the torch.
Collar is fully parametric (the diameter of the collar change the whole construction) now is set to 30mm handlebar diameter.
You will need two M4x10 screws (depending of the diameter of the handlebar too) and two M4 nuts (better if auto locking)

Collar printed in petg
Case printed in tpu
Same infill same settings except material specs