3D模型：Creality Ender 3 S1 Pro网络摄像头固定架
Webcam mount for Creality Ender 3 S1 Pro
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
After trying a few different webcam mount positions using small clamps, I decided the right end of the x axis was the place for me.
This thing slips neatly over the metal bracked on the Ender 3 S1 Pro, and has a 6.5mm hole through which a standard camera mount screw can be inserted.
Note, I used a screw from the camera screws and nuts library by kijja https://www.thingiverse.com/thing:4763840/files. Specifically, I used CameraScrewL10H19T6 which has a large thumb wheel and a 10mm threaded section.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 S1 Pro
- Rafts:No
- Supports:No
- Resolution:0.20mm
- Infill:30%
- Filament brand:
Creality
- Filament color:
Black
- Filament material:
PLA
- Notes:
Print this with the webcam mount arm upwards The design includes supports for printing in this direction - it might get a little bit messy inside the cavities but they're out of sight and it doesn't impact the functionality.
Post-Printing
Tags
License
Webcam mount for Creality Ender 3 S1 Pro
by bcb2k is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
最新模型
-
玛莉德2024-05-08 -
CQC 6XX耳机改装模型2024-05-08 -
简单植物 combat 机器人2024-05-06 -
蜂窝灯 ... 简约版2024-05-06 -
侧边挂钩VW Cabriolet2024-05-06
最热下载
-
伊瑟宁加德骰子塔（奥斯坦克）2024-01-17 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
俄亥俄州日全食针孔观察器2024-05-03 -
Enders 3版控制面板2024-05-08
