瑞吉德轨道锯存储架
Ridgid Track Saw Track Storage Brackets
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
These brackets are for mounting Ridgid track saw track to the wall. They should work for any brand of track though.
Use dry wall screws or equivalent to mount the brackets, so the screw heads sit flush with the print and don't scratch your track. I put up all of the bottom brackets first using a level, set the track on the brackets and held the top bracket in place so that it held about 1/8" of the track. I made a mark on the wall, removed the track and then screwed the top bracket in place.
Print Settings
- Printer:
Qidi Tech X-Pro
- Rafts:Yes
- Supports:No
- Resolution:.25
- Infill:30% cubic
- Filament brand:
Qidi
- Filament color:
Red
- Filament material:
PLA
- Notes:
Print on short edge for maximum strength. You need at least two bottom brackets (three is better for the long track) and one top bracket per track. I ran my first print with just a skirt and one of the pieces broke loose during printing. I used a brim for the second run and had no problems.
Tags
License
Ridgid Track Saw Track Storage Brackets
by kbieb is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
地球巨人（加入我们的 Patreon）2023-03-26 -
Peugeot 2008 iPhone Magsafe Holder2023-06-19 -
ESP8266与OLED 1306案例分析2023-09-16 -
三脚架快速下放板2024-03-28 -
适用于Raspberry Pi5的多功能适配器外壳2025-07-27
最热下载
-
CoreXY框架（v2.0）2023-03-26 -
二十面体骰子模型2024-03-29 -
7英寸HDMI显示器-B外壳2024-04-01 -
Ikea 米兹顿 插嵌2024-04-20 -
吸血鬼领主（免费D&D小模型）2025-07-15
最新模型
-
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16 -
Casio SK-2100麦克风外壳2024-05-08 -
魔术子弹搅拌机 (MBR-1101) - 电机安装底座齿轮更换2024-05-08 -
车盖扣环衬套2024-05-06