Ikea Umbrella Parasol LILLEÖ维修支架
Ikea Umbrella Parasol LILLEÖ repair stub
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
If you own this Ikea parasol (LILLEÖ), the stubs that hold the spines can deteriorate and disintegrate over time, leading to a less than usable parasol because the umbrella spines are no longer constrained in position. This part replaces the stubs and restores the parasol to full functionality.
Simply remove (unpick) the old part, and place this part on and sew it to keep it in place. The part should be printed from Nylon or PETG, and not PLA or ABS as the umbrella is likely to be used outdoors in the Sun/UV.
The parasol will be as good as new.
Print Settings
- Printer brand:
Prusa
- Printer:
i3 MK3
- Rafts:No
- Supports:No
- Resolution:0.1
- Infill:25%
- Filament brand:
Any
- Filament color:
Clear
- Filament material:
PETG
Tags
License
Ikea Umbrella Parasol LILLEÖ repair stub
by kohjbeng is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
最新模型
-
弗罗贝起重机2024-05-08 -
轴向杯托2024-05-08 -
Taco Bell国际象棋套装：骑士版本2024-05-08 -
Base Jigkick v2 for psp Baryon Sweeper2024-05-06 -
用于独木舟及其他栏杆的栏杆杯托2024-05-06
最热下载
-
FPV 模型：原型坦克配备炮塔2023-03-26 -
参数化的两部分模具生成器（用于OpenSCAD）2023-03-26 -
3D打印斯特林发动机型号Alpha2023-03-26 -
红米手表4号充电基座2024-03-15 -
NA Miata车灯遮光条折叠机构顶盖2024-04-15