SONOS SYMFONISK音响灯挂架

SONOS SYMFONISK Speaker Light Hanger

2023-09-08 18:02:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hanger for my Ikea SONOS Symphonisk lamp

I wanted to hang my Ikea SONOS Symphonisk lamp from the ceiling in my kitchen rather than have it taking up space on a counter. Unfortunately it did not have any mounting options, so I designed a hanger that I think fits with the overall design for the lamp with some strain relief etc.

This was then attached to the lamp with 3M VHB double sided tape (Which I let cure for the full 72hours that is recommended.

The sound is actually better since it is almost at eyelevel now. (The only down side is that you can not remotely turn the light on and off remotely (why SONOS???), but this is easily fixed with a smart bulb).

The cable hanger is for taking the cable strain and hanging from the ceiling hook inside the cup. I pushed the cable through the hook twice and wrapped it around.

In Sweden, the ceiling light have special plug sockets so I had to replace the plug on the cable supplied with the lamp anyway, but this has to be done to get the cable through the holes on the hanger, the cup and tee cable hanger anyway.

Note: The original cup to cover the wiring and cable hanger on the ceiling should probably be about 2cm longer, so have a look at Cup v2.stl.

Update: 3M VHB tape did not last. I have now glued the base on with 2 part epoxy and it seems to be holding perfectly minus the ugly black line created by the VHB tape.