DivTIESUS ZX Spectrum界面外壳
DivTIESUS Interface Case for ZX Spectrum
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a first version of a simple case I designed for DivTIESUS interface (http://www.zxprojects.com/divtiesus/).
You will need 4xM3 screws to complete the case.
It's a first version/WIP, so be aware there might be some imperfections ;-)
Anyway, the STEP file is provided should you wish to modify on your own.
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:No
- Supports:Doesn't Matter
- Resolution:0.2mm layer, 2 perimeters
- Infill:15%
- Filament brand:
Prusament
- Filament material:
PLA
- Notes:
Use no supports (beware: some bridging will be necessary around buttons, PS2 connector and SD card). Alternatively you can use supports - had a good results with Prusa Slicer organic supports.
Buttons can be printed in two colors to make the lettering more visible - use normal filament change on layer capability of the slicer.
License
DivTIESUS Interface Case for ZX Spectrum
by me72_rafal is licensed under the Creative Commons - Attribution - Non-Commercial license.
猜你喜欢
联系我们
热门推荐
-
定制 Chilienne Playmobil 3D模型2023-03-26 -
Heelys插件（中型）2023-03-27 -
FMS Aventi鼻锥部件2023-05-06 -
幽灵骑士：Ed-sept7作品2023-05-13 -
ESP8266与OLED 1306案例分析2023-09-16
最热下载
-
人耳道2023-03-26 -
GPD Win3 把手型号2023-04-07 -
猫咪零食球2024-03-29 -
GLOCK 17型手枪2024-05-03
最新模型
-
模块化笔筒链2025-07-19 -
天使和恶魔2025-07-16 -
巴黎卢浮宫的三圣母像2025-07-16 -
苍井空老师全身像苍井空跪姿2025-06-27
